Toronto Photography Meetup Group

TPMG.CA
It is currently Fri Oct 24, 2025 1:05 pm

View unanswered posts | View active topics


Board index » Photography Forums » Gear and Equipment

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 55 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
bluntman
 Post subject:
PostPosted: Wed Apr 21, 2010 10:01 am 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
undergrad. wrote:
bluntman wrote:
Just finished mine this evening using a 22" diameter mixing bowl and a 9" diameter pizza dish (both from Tap Hong). I have a Sto-fen Omnibounce attached to the flash head for "protection" from the relatively sharp edges.

I stopped by Sears this afternoon for more cut-off wheels for my Dremel and noticed that a 20 pack of reinforced cut-off wheels were on clearance for $9.94. I picked up two and took them to the cashier to pay and they rung up to $4.39 with tax for both packs together! Maybe this bit should be posted in RFD. :lol:

Post pictures please :D
I plan to start putting mine together later today.
The pan I got is an inch smaller then the one they suggested, but I'm sure it will still get the job done.

Did you use the lastolite Ezybox hotshoe plate?


Yes I did.

I had to go with the larger pizza pan due to the large flash head on my Sony HVL-F58AM flash - there wasn't much material left in the middle of the "ring" of the Lastolite to attach the front diffuser.

For those interested in taking on thsi project but don't want to dish out the $75 Vistek wants for the original Lastolite bracket, Studio98 on eBay has this bracket with a foldable softbox for about half the price of the bracket alone!

http://cgi.ebay.ca/20-x-20-SOFTBOX-FOR-NIKON-CANON-SPEEDLIGHT-SPEEDLITE_W0QQitemZ360230357889QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53df670b81
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Thu Apr 22, 2010 8:26 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
Didn't need to modify the Lastolite bracket, just needed the correct size bolts.

Image

Image

Image

Image

Image
Top
 Profile  
Reply with quote  
bzride
 Post subject:
PostPosted: Fri Apr 23, 2010 11:17 am 
Offline
User avatar

Joined: Fri Aug 08, 2008 9:44 am
Posts: 356
Has thanked: 0 time
Have thanks: 0 time
nice work!

you going to paint it still?
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Fri Apr 23, 2010 1:04 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
I think I will leave it as it is.
Top
 Profile  
Reply with quote  
undergrad.
 Post subject:
PostPosted: Fri Apr 23, 2010 3:11 pm 
Offline

Joined: Tue Sep 04, 2007 7:02 pm
Posts: 197
Location: Toronto
Has thanked: 0 time
Have thanks: 0 time
I could be wrong, but I don't think your going to get the full beauty dish effect unless the inside is white.

I'm just waiting for the paint to fully dry and then I'm putting mine together.
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Fri Apr 23, 2010 9:25 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
My Alien Bees beauty dish is silver, inside and out, as well. AB switched from a white interior on their dish to a silver finish (which they now call the High Output Beauty Dish). They also include a white sock that goes over the entire dish which also fits around the DIY dish.
Top
 Profile  
Reply with quote  
undergrad.
 Post subject:
PostPosted: Sat Apr 24, 2010 3:31 pm 
Offline

Joined: Tue Sep 04, 2007 7:02 pm
Posts: 197
Location: Toronto
Has thanked: 0 time
Have thanks: 0 time
Do excuse the horrible images.
Image

Image

Image
Top
 Profile  
Reply with quote  
mitchellbrown
 Post subject:
PostPosted: Sat Apr 24, 2010 4:10 pm 
Offline

Joined: Tue Apr 20, 2010 10:51 am
Posts: 20
Location: Grimsby, Ontario
Has thanked: 0 time
Have thanks: 0 time
Nice job undergrad
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Sat Apr 24, 2010 4:38 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
nice!
Top
 Profile  
Reply with quote  
dcsang
 Post subject:
PostPosted: Sat Apr 24, 2010 5:16 pm 
Offline

Joined: Sat Jun 03, 2006 9:44 am
Posts: 547
Location: Here
Has thanked: 0 time
Have thanks: 0 time
Wow.. nice work you guys :)

I really should start mine *LOL*

I think the white paint is a good idea, but I'll probably look at a gloss or semi-gloss versus a flat..

Cheers,
Dave
Top
 Profile  
Reply with quote  
undergrad.
 Post subject:
PostPosted: Sat Apr 24, 2010 7:14 pm 
Offline

Joined: Tue Sep 04, 2007 7:02 pm
Posts: 197
Location: Toronto
Has thanked: 0 time
Have thanks: 0 time
I would suggesting priming the bowl and pizza pan.
The spray paint I used had some primer in it, but not nearly enough.
The paint has already begun to chip off.
Top
 Profile  
Reply with quote  
GL
 Post subject:
PostPosted: Sat Apr 24, 2010 10:26 pm 
Offline

Joined: Thu Jun 21, 2007 2:08 pm
Posts: 80
Location: Toronto
Has thanked: 0 time
Have thanks: 0 time
The original guide suggested sanding the bowl before painting. Did that help at all or is a layer of primer a must?
Top
 Profile  
Reply with quote  
Carlton
 Post subject:
PostPosted: Sat Apr 24, 2010 10:37 pm 
Offline
TPMG SUPERSTAR
User avatar

Joined: Tue Jul 14, 2009 11:46 am
Posts: 2119
Location: Toronto
Has thanked: 0 time
Have thanks: 1 time
Isn't that why it's stainless steel? lol just kidding. Hummm, maybe some metal primer like tremclad before the finish? Nice job guys! Looks really pro!
Top
 Profile  
Reply with quote  
Shuttereye
 Post subject:
PostPosted: Sat Apr 24, 2010 10:57 pm 
Offline

Joined: Wed Jul 08, 2009 12:19 pm
Posts: 512
Has thanked: 0 time
Have thanks: 1 time
bah I painted my first coat too thick. Need to start over again.
Top
 Profile  
Reply with quote  
undergrad.
 Post subject:
PostPosted: Sun Apr 25, 2010 6:25 am 
Offline

Joined: Tue Sep 04, 2007 7:02 pm
Posts: 197
Location: Toronto
Has thanked: 0 time
Have thanks: 0 time
GL wrote:
The original guide suggested sanding the bowl before painting. Did that help at all or is a layer of primer a must?

I sanded the bowl by hand and I still had the issue.
Cheap spray paint may very well be to blame.
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Mon Apr 26, 2010 2:27 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
Does anyone still need help with their beauty dish? I can cut and drill but I don't have the patience to wait for paint to dry. :lol:
Top
 Profile  
Reply with quote  
Seren Dipity
 Post subject:
PostPosted: Mon Apr 26, 2010 2:40 pm 
Offline
TPMG SUPERSTAR
User avatar

Joined: Tue Jan 22, 2008 4:29 am
Posts: 3415
Location: James in RH
Has thanked: 2 times
Have thanks: 2 times
Flickr: http://goo.gl/cahhK
How is the quality of light from these beauty dishes? Anyone have examples?
Top
 Profile  
Reply with quote  
mitchellbrown
 Post subject:
PostPosted: Mon Apr 26, 2010 3:28 pm 
Offline

Joined: Tue Apr 20, 2010 10:51 am
Posts: 20
Location: Grimsby, Ontario
Has thanked: 0 time
Have thanks: 0 time
bluntman wrote:
Does anyone still need help with their beauty dish? I can cut and drill but I don't have the patience to wait for paint to dry. :lol:


And I don't have the smarts to build one but I can paint...........how much would an unpainted one be??????????????
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Mon Apr 26, 2010 3:30 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
22" mixing bowl from Tap Hong - $20
9" pizza dish from Tap Hong - $2.50
Lastolite bracket from Vistek - $76
various nuts and bolts - ???
Top
 Profile  
Reply with quote  
Delsorbo
 Post subject:
PostPosted: Mon Apr 26, 2010 5:03 pm 
Offline
TPMG ADDICT
User avatar

Joined: Tue Oct 23, 2007 9:41 pm
Posts: 1753
Has thanked: 2 times
Have thanks: 1 time
Flickr: http://www.flickr.com/photos/delsorbo/c ... 448542755/
great work guys!! are there sample shots of these babies in action?
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Wed Sep 01, 2010 5:40 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
Finally had an opportunity to use this...

Image

Image
Top
 Profile  
Reply with quote  
Delsorbo
 Post subject:
PostPosted: Wed Sep 01, 2010 6:11 pm 
Offline
TPMG ADDICT
User avatar

Joined: Tue Oct 23, 2007 9:41 pm
Posts: 1753
Has thanked: 2 times
Have thanks: 1 time
Flickr: http://www.flickr.com/photos/delsorbo/c ... 448542755/
wow great work! did you end up painting yours?
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Wed Sep 01, 2010 6:22 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
No, I left it alone. I brought the "sock" that came with my Alien Bees HO beauty dish to see what sort of effect that would give, but since my flash gun was a lot less powerful than my Alien Bees strobe, it killed quite a bit of light.
Top
 Profile  
Reply with quote  
Delsorbo
 Post subject:
PostPosted: Wed Sep 01, 2010 6:47 pm 
Offline
TPMG ADDICT
User avatar

Joined: Tue Oct 23, 2007 9:41 pm
Posts: 1753
Has thanked: 2 times
Have thanks: 1 time
Flickr: http://www.flickr.com/photos/delsorbo/c ... 448542755/
so are you shooting with the diffuser on the flash?
Top
 Profile  
Reply with quote  
bluntman
 Post subject:
PostPosted: Wed Sep 01, 2010 7:32 pm 
Offline
User avatar

Joined: Wed Dec 31, 2008 9:23 am
Posts: 154
Location: Thornhill
Has thanked: 0 time
Have thanks: 0 time
Flickr: http://www.flickr.com/photos/arthurlegardo/
hmm, good point, yes it did...I didn't want to scratch the head of my flash.
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 55 posts ]  Go to page Previous  1, 2

Board index » Photography Forums » Gear and Equipment

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group